Red One Mysterium X Camera |
| Chater Camera, Inc |
| 1336 Ninth Street |
| Berkeley, CA 94710 |
| t: 510.525.5400 |
| f: 510.295.2478 |
| ACCESSORIES | |
| Red One Camera Body Only Red 18-50mm Zoom T3 Red EVF Red 5.6" LCD Red Compact Flash Cards 16gb Red Compact Flash Cards 8gb Red Drive 320gb Red 140wh Batteries 19mm/15mm Element Technica Base Viewfactor Origo Remote w/ 30 ft. cable ET Mantis Hand Held Kit |
$ 400 / Day $ 150 / Day $ 150 / Day $ 100 / Day $ 40 / Day $ 15 / Day $ 100 / Day $ 20 / Day $ 25 / Day $ 30 / Day $ 50 / Day |
| 6.6x6.6" Schneider IR-750 Cut Filter 4x5.65" Schneider IR-750 Cut Filter 4x5.65 Tiffen 80a,b,c,d Filter Set |
$ 11 / Day $ 10 / Day $ 40 / Day |
| Red Rocket Card / MacPro 8-Core 2.8Ghz | $ 375 / Day |
| Red One Camera |
| RED ONE Build 16, v3.2.5, Jul 29, 2008 |
| Updated .R3D file format, Digital Signal Processing optimization, Image Compression Optimization, addition of REDspace and RAW view modes, high contrast scene codec error mitigation, audio polarity and video sync correction, LCD image tearing reduction, Pre-Record Mode, Preliminary support for 16GB CF cards, support for 1080p 4:2:2 and RGB 4:4:4 playback of REDCODE RAW .R3D files, User Programmable Keys, RED-EVF menus, Time Code output on LEMO 5 pin timecode connector, Tonal Response Curve, editable LOOK files names, video visible during boot up sequence. |
| Significant changes since Build 15: |
| * New .R3D file format * Digital Signal Processing optimization. * Image Compression Optimization. * Support for 4K 16:9 recordings in REDALERT and QuickTime based applications. * Preliminary support for RED 16GB CF cards. * Fixed high detail scene codec errors in 4K 16:9 recordings. * Fixed polarity of audio recording relative to MIC and / or LINE inputs. * Improved audio sample to video frame synchronization (lip sync accuracy). * Reduced RED-LCD display tearing on last few lines in 4K record / playback. * Addition of REDspace and RAW viewing modes. * Updated file name structure to eliminate duplicate file names. * Addition of Pre-Record (10 sec or 30 sec loop) mode. * In-camera 1080p playback of REDCODE RAW 4K / 3K / 2K .R3D files. * Time Code output enabled on the LEMO 5 pin timecode connector. * Improved display precision and color response of RED-EVF and RED-LCD. * Addition of MONO mode Histogram. * Improved accuracy of RGB Histogram display. * Changed default Color Temp to be 5600K * Seperation of Sensitivity (ASA) and Exposure (Compensation) parameters. * Extended exposure times of up to 1/2 sec enabled in TIMELAPSE menu. * Addition of Burst record mode in Timelapse menu. * Added RED-EVF control over Audio, Shutter, ISO and Varispeed parameters. * Changed COLOR exposure meter to reflect REDspace monitoring as default. * Added programmable Tonal Response Curves menu. * Support for P.C editing of file names of camera LOOK files. * Support for Gray Scale to look around area of GUI. * Look Around available on HD PREVIEW outputs when LCD and EVF are active. * Improved video Genlock (Tri-Level Sync) lock for 23.98, 24.00, 25.00, 29.97. * Added 1.85 and 2.40 Safe Action and Safe Title Protection Guides. * Improved indiction of image magnify mode with new “X” cursor * User programmability of A, B, C keys and USER 1, 2, 3, 4, 5 Keys * Return to last menu position before exiting menus, when UNDO-SYSTEM is pressed * Changed project FRAME RATE label to TIME BASE. * Disabled auto-reset of reel counter on change of project time base. * Added RESET # (manual reset of reel counter) in MEDIA menu. * Changed FORCE REEL label to CHANGE # and relocated it to MEDIA menu. * Decreased boot up time, and video is now visible during boot up sequence. * No roll-back of camera firmware permitted to Build 15 or earlier. |
| Operational restrictions of Build 16 series firmware: |
| * If using a 16GB CF card, upgrade file is not erased at the end of the upgrade process. * If using a 16GB card, dropped frames may be possible in Pre-Record * On power up, monitors may display Blue channel only – if so power cycle. * LCD tearing may sometimes be visible in lower 10% of screen with 4K footage. * Genlock (Tri-Level Sync) for 50.00 fps has not yet been verified. * Non Build 16 formatted media will report “DISK INCOMPATIBLE”- reformat to clear. * Image Magnify is not available during recording at 4K resolutions. * Edge Code not available from LEMO 5 timecode connector. * Audio and Timecode not embedded on HD-SDI outputs. * 1080p HD-SDI outputs do not support PsF signal formatting option. * COLOR exposure meter only operates accurately when in VIEW REDspace * Limited GUI on HD Preview when both RED-EVF and RED-LCD are selected. * EVF display with blank for approximately 3 seconds when in SYNC refresh mode: * when exiting OPEN GATE mode * after a change in Project Resolution * after exiting MAGNIFY when in 4K resolution * after a Varispeed frame rate change * When in OPEN GATE mode, Genlock (Tri-Level Sync) is not available. * Cannot exchange camera LOOK (.RLK) files with RED Alert! or REDCINE. Copyright© 2008 RED Digital Cinema, All Rights Reserved. |
|
| Red One MX Production Package | $ 1075 day / $3225 wk / $10750 mth |
| Red One Production Package | $ 925 day / $2775 wk / $ 9250 mth |
| Red One Body Red Zoom 18-50mm T3 Red LCD Viewfinder 19mm or 15mm Element Technica Base Red Charger/ Power Supply 4 x Red Batteries 140wh 5 x Compact Flash Cards 8gb 2 x Red Drive 320gb O'connor 1030B or Sachtler Tripod Chrosziel Follow Focus Chrosziel Mattebox Filters - ND Set/ Pola |
|
| Red One MX Body Package | $ 700 day / $2100 wk / $7000 mth |
| Red One Body Package | $ 500 day / $1500 wk / $5000 mth |
| Red One Body Red LCD Viewfinder 19mm or 15mm Element Technica Base Red Charger/ Power Supply 4 x Red Batteries 140wh Option : 5 x Compact Flash Cards 8gb or 1x Red Drive 320gb |
|
| ©2010 chater camera inc. all rights reserved |
| Red One MX Body Only | $ 600 day / $1800 wk / $6000 mth |
| Red One Body Only | $ 400 day / $1200 wk / $4000 mth |